Item:Ulimate Duo Balance Charger
DC Input Voltage : 11-30V
Display Type: 2×16 LCD Display
Case Material: Metal
Case Size: 200x140x55mm
Charge Wattage: 700W x 2
Discharge Wattage: 30W X2
PC Communications: USB Port for PC Control & Firmware Upgrade
External Port: Balance Socket-XH, Temperature Probe Socket,
Charge Cutoff Temperature: 20-80ºC(adjustable)
Charge Voltage: NiMH/NiCad: Delta peak detection
Balance Current: Max. 800mA/cell
Trickle Current for NiMH/NiCad: 50-300mA & OFF
Reading Voltage Range: 0.1-34.8V/cell
Balance Cells: 8 cells
Memory: 10 different charge/discharge profiles in each channel
Charge Method: CC/CV for lithium types and lead (Pb) batteries.Delta-peak Sensitivity for NiMH/NiCad
Cooling System:Built-in fan x2pc
Usage:Compatible with NiMH,NiCad,LiPo,LiIon,LiFe,LiHV,Pb etc
Optimized Operating Software
Ultimate Duo 1400W features the so-called AUTO function that set the feeding current during
the process of charging or discharging. Especially for lithium batteries, it can prevent the
overcharging which may lead to an explosion due to the user's fault. It can disconnect the
circuit automatically and alarm once detecting any malfunction. All the programs of this product
were controlled through two way linkage and communication, to achieve the maximum safety
and minimize the trouble. All the settings can be configured by users!
Battery Memory (Data Store/Load)
The charger can store up to 10 different charge/discharge profiles in each channel for your
convenience. You can keep the data pertaining to program setting of the battery of continuous
charging or discharging. Users can call out these data at any time without any special program
Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. (for expert user only)
When charging two same batteries, both charging channels can be set by channel one.
PC Control Software “Charge Master”
The free “Charge Master” software gives you unparalleled ability to operate the charger through
the computer. You can monitor pack voltage, cell voltage and other data during the charging,
view charge date in real-time graphs. And you can initiate, control charging and update
firmware from “Charge Master”.
LiHV Mode Available
The additional LiHV mode is able to charge the new generation of LiPo batteries with an
end of charge voltage of 4.35 V.
Internal Independent Lithium Battery Balancer
Ultimate Duo 1400W employs an individual-cell-voltage balancer. It isn't necessary to connect
an external balancer for balance charging.
Balancing Individual Cells Battery Discharging
During the process of discharging, Ultimate Duo 1400W can monitor and balance each cell of
the battery individually. Error message will be indicated and the process will be ended
automatically if the voltage of any single one cell is abnormal.
Adaptable to Various Type of Lithium Battery
Ultimate Duo 1400W is adaptable to various types of lithium batteries, such as LiPo, LiIon and
the new LiFe and LiHV series of batteries.
Fast and Storage Mode of Lithium Battery
Purposes to charge lithium battery varies, 'fast' charge reduce the duration of charging,
whereas 'store' state can control the final voltage of your battery, so as to store for a long time
and protect useful time of the battery.
1 to 5 cyclic and continuous process of charge > discharge or discharge > charge is operable
for battery refreshing and balancing to stimulate the battery's activity.
Re-Peak Mode of NiMH/NiCd Battery
In re-peak charge mode, the charger can peak charge the battery once, twice or three times in
a row automatically. This is good for making certain the battery is fully charged.
Delta-peak Sensitivity for NiMH/NiCd
Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination program based
on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the
threshold, the process will be terminated automatically.
Automatic Charging Current Limit
You can set up the upper limit of the charging current when charging your NiMH or NiCd
battery, it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging
LiPo Battery Meter
The user can check battery's total voltage, the highest voltage, the lowest voltage and each
Battery Internal Resistance Meter
The user can check each cell's internal resistance.
The charging capacity is always calculated as the charging current multiplied by time. If the
charging capacity exceeds the limit, the process will be terminated automatically when you set
the maximum value.
The battery's internal chemical reaction will cause the temperature of the battery to rise. If the
temperature limit is reached, the process will be terminated.
This function is available by connecting optional temperature probe, which is not included * in the package.
Processing Time Limit:
You can also limit the maximum process time to avoid any possible defect.
User Manual, Please Click Here
1 x SkyRC 1400W Duo Charger
2 x 2~8S Multiple Balance Board Adapter
2 x Insulated Banana to Xt60 Battery Connector
2 x Charging Cable With Insulated Banana Connector