Modulation mode: QPSK
Spread spectrum: DSSS
Operating Voltage: 8.6~15V
Channel bandwidth: 5.0MHz
Operating Current: <105mA
Adjacent channel rejection: >38dbm
Control distance: more than 600 meters ground
Channel: 9 Channel, 8~9 channel are customize
Screen: 2.8 inch 16 colorful screen , 240*320 pixel3
Frequency: 2.4GHz ISM band (2400MHz to 2485MHz)
Transmitter power: <100mW(PCB testing), <20dbm(3 meter air testing)
Simulator model: under the simulator model the transmitter action turn off, change to power saving model
Compatible model: Include all 120 degree and 90 degree swash plate helicopter, all fix wing and glider, five flying model
R6DS Receiver Specification:
Brand Name: Radiolink
Item Name: R6DS
Channel: 6 (Red LED indicator is for PWM mode. Blue LED for PPM, can be extended to 10channels)
Receiver Operation: SBUS/PPM and PWM signal change(Short press the ID SET switch two times within 1 second, the signal is changed from normal PWM to SBUS/PPM.red LED indicates the normal PWM and blue/purple indicates SBUS/PPM.)
Power Input: MAX 6V
Control Distance: 600m in air
Current Consumption: 38-45mA (Input voltage:5V)
AT9 Transmitter Feature:
-Adopt two-transmission technology of RadioLink AT10 10CH Radio Control, support signal strength, receiver voltage monitored,
and extending battery voltage, temperature, motor RPM, GPS etc.
-Support English & Chinese Menu. Including helicopter 8 swash plate models, fixed wing 2 airfoils 3 rears, gliders 4 airfoils and rears. Freely operating any styled aircraft
-Four VR switches, three three-way switches, four two-way switches, a reset trainer switch. Support multiple aerial control mode
and PTZ control.
-Programmable mix control. Basic menu, Advanced menu,Graph view for varieties of throttle and servo curve.
-Fast response, 3ms only, which is much less than the average 20ms even 9 channels it acts synchronously.
-DSSS spread spectrum mode supplies better performance in anti-interference
-2.8 inch 16 colors LCD resolution 240×320 distinct and magnificent
-4096 section precision, 0.25us per section, servo anti-shake rudder
-Actual measurement: ground 600 meters, air 1000 meters
-Support USB online upgrade
R6DS Receiver Features:
-DSSS&FHSS act perfect on anti interference, especially on 433 and graph transmission.
-Output SBUS, PPM and PWM signals simultaneously.
-Top speed response, 3ms for all channels parallel.
-Top precision 4096, 0.25us every bit insure every servo stable.
-Sub miniature size, totally weights 3.4 grams, never burden to your drones, best choice for light drones.
-All channels response parallel, totally 3ms.
-Specially used for light drones, compatible with all flight controllers such as DJI NAZA, ZERO TECH, PIX, APM, MINI APM, NAZE32, and CC3D
-One single cable connect with the flight controller, easy setting
-PWM output: 6 channels totally.
-PPM output: CH1 outputs PPM signal for 10 channels, and channel 2 to channel 6 output independent PWM signal simultaneously.
All channels have a response time of 3 ms. Specially designed for light drones, and compatible with all flight controllers such as DJI NAZA, ZERO TECH, PIX, APM, MINI APM, NAZE32, and CC3D etc. All it takes is one single cable connected to your flight controller and you're good to go. And with its miniature size and a total weight of 3.9 grams, the R9D will never be cumbersome on your drones.
1 x AT9 2.4G 9CH Transmitter
1 x R6DS 6CH PPM PWM SBUS Output Receiver