Night Vision HD Model Monitoring DIY Wireless Micro Camera Set For RC Model


Night Vision HD Model Monitoring DIY Wireless Micro Camera Set For RC Model
Price: US$14.99
Free Shipping





Night Vision HD Model Aircraft Monitoring DIY Wireless Micro Camera Set

Specification

Light weight, 3.4g, Almost would not be affected the model flight height.

Low current, 123 mAh, seldom will not affect the flight time.

High definition and High frames ,To ensure the screen clarity and fluency

Unique anti-jamming technology, could anti-jamming 27MHz or 2.4GHz, reduce interference remote distance

Technical Specifications JH-2202A

Night Vision HD Model Monitoring DIY Wireless Micro Camera Set For RC Model

1.Functional Overview

a.This module is a simplified version, no MIC,USB output,manual buttons,batteries. Just have photos and videos functions with remote control capabilities.

b.Camera pictures and video formats, camera resolution is 1280 × 940, JPEG file format. Shooting video resolution is 640 × 480 or 720 × 480, frame rate 30fps, AVI file format. The shooting resulting data is stored in TF card,please pull out the TF card and use the card reader.

2.camera parameters

Using FPC soft cable welded and 30W pixels PAS6329 chip. Imaging lens specifications is 8x8mm

3.power supply and the remote control signal input

The machine's power and with the introduction of the remote control signal input.

As below shown

Night Vision HD Model Monitoring DIY Wireless Micro Camera Set For RC Model

A. Power on: the machine automatically starts with connect the power.If the red light on first, then the green and red light flash 6 times and shutdown automatically indicates no detectable TF card or TF card apacity has been reached.
B. Standby: red light on
C. Video: VIDEO control line low level triggered initiating record function, red light flicker. If low level triggered again, it will quit the video function and save your file to the stand by state. Green light on.
D. Photo: control line low level triggered the photo function, when the lights off and red light flashes two times means continuous shoot for three photos and saved. Then automatically back to stand by state, blue light on.

You Might Also Like: