Brand Name: LANTIAN
Item Name: NAZE32 Brushed Flight Control Board
Working Voltage: 3.3v-4.35v(1S Lipo)
Built-in Receiver: DSM2 6CH PPM Receiver
1. LANTIAN NAZE32 is base on 6Dof NAZE32 firmware, can be flashed with CleanFlight configurator.
2. Supports ALIENFLIGHTF1 and NAZE.
3. This Flight Controller used high quality 3 oz four layer PCB board. Support 4-axis and 6-axis Flight mode.
4. With a large current NMOS transistors, operating current of up to 6A.
5. Integrate 5V step-up Voltage Booster Power Module,1S lipo battery will step-up 5V, Maximum current output is 400mA.
Users can also choose "NAZE" firmware in configurator CleanFlight,But with the NAZE firmware users need to send a command "motor_pwm_rate set = 32000" on the CLI page, change "400" to "32000" of register "motor_pwm_rate" and then also need to send the command "save" Save Settings.
If users does not modify or modify the value of the register is not saved, the motor will continue to rotate and can not be stopped when connected the battery.
Because of the high complexity, we do not recommend to used "NAZE" firmware.
1 x NAZE32 Brushed Flight Controller Built-in DSM2 Receiver