Iteaduino MEGA2560 R3 Board:
Arduino MEGA 2560 than Arduino UNO has more resources and more processing power, but the Arduino MEGA board is too big, and can't very well compatible with the expansion of the UNO board. So this small Iteaduino MEGA 2560, compatible with most ITEAD provides all kinds of Arduino UNO compatible expansion board.
1. The smaller size, compatible with prior Arduino board shape and positioning hole
2. Compatible with most existing Arduino expansion board
3. DC power circuit, save electricity above 50% than Arduino MEGA 2560
4. 3.3V and 5V optional level, allowing you to connect 3.3V module does not need external level shifter!
Note: IDE programming selection board type: Arduino mega 2560 or mega ADK
2.8 Inch LCD Board:
This LCD touch screen board is a compatible Arduino UNO / Mega colorful TFT display with touch screen and SD card slot.
Arduino expansion board is compatible with the pin leads to connect accessories. TFT driver is based ILI9325DS with eight digit and four digit control interface.
Arduino 2.8 inch TFT LCD touch expansion board can work with 3.3V and 5V, so it can also be displayed on the CHIPKIT UNO32 and Simplecortex.
Compatible with Arduino UNO Rev3 / Mega expansion board pin
Support Arduino library UTFT
TFT Resolution: 240 x 320 pixels
Dimensions: 2.8 inch
Voltage: 5V / 3.3V
LCD Interface: 16 bit parallel
Touch Panel: SPI
Here is the driver: Click here to open
1 x Iteaduino MEGA2560 Board
1 x 2.8 Inch TFT LCD Touch Screen
2 ICSP ports, one for the ATMEGA2560 to burn Bootloader, one for ATMEGA8U2