H605 Air is a smart charger operated by mobile phone APP ( iSDT GO ). The mobile phone communicates with H605 through low-power Bluetooth ( BLE ) to read real-time information of charger and set charging task.
How to use:
First, open the app while making sure the phone's Bluetooth is turned on. Click “+” in the upper right corner of the interface to enter the “Bluetooth Scan” interface.
Make sure that the H605 Air does not have any external battery. Press and hold the H605 Air button for 2 – 3 seconds until the indicator light flashes blue. At this time, the H605 is in the binding state for about 30 seconds ( H605 is only in the binding state, iSDT GO APP can be added successfully ). Click on the button in the middle of the ISDT GO Bluetooth scanning interface to start scanning the surrounding ISDT Bluetooth charger. The scan lasts for approximately 15 seconds, during which the surrounding iSDT Bluetooth charger will appear in the list below. Once the device you want appears, click Add.
After the addition is successful, return to the main interface to discover the newly added device.
– Ordinary battery:
Click the floating button at the bottom of the interface to see the “Charging Settings” window. Once setup is complete, click the flyover button below to initiate charging.
– BattGO battery:
In addition to using the APP for charging, the BattGO battery also supports APP-free charging. After connecting the BattGO battery to the H605 charger, press the H605 button to start charging. Press and hold to stop charging.
In the charging state, click the lower floating button again or press and hold the H605 button to stop charging.
Click the gear button in the upper right corner to enter the settings interface, click the "Delete device" button below to delete the device.
H605 indicator meaning:
Standby state: white is always bright
Charging status: orange flashing
Flashing once: battery capacity less 25 percent
Flashing 2 times: battery capacity less than 75 percent
Flashing 3 times: battery capacity less than 100 percent
Steady green: fast charge completed
Blue is always on: balance is complete
Binding status: blue flashing
Charging abnormality: red flash
Product weight: 68g
Package weight: 90g
Product size (L x W x H): 78X55X18mm
Package size (L x W x H): 90X65X25mm
Input Voltage Range: DC 10~27V
Output Voltage Range: 0.5~28V
Output Current Range: 0.1~5.0A
Balanced Cells: 6S
Balance Current: 250mA
USB Output: 5V/1A
Max Charge Capacity: 50W
Maximum Charge Current: 5A
APP download link:
1.Google Play download ISDT or ISD GO
1X ISDT H605 Charger