ImmersionRC Vortex 150 Mini 150mm F3 OSD 600mW 40CH FPV Racer PNP


ImmersionRC Vortex 150 Mini 150mm F3 OSD 600mW 40CH FPV Racer PNP
Price: US$299
Free Shipping





ImmersionRC Vortex 150 Mini 150mm F3 OSD 600mW 40CH FPV Racer PNP

ImmersionRC Vortex 150 Mini 150mm F3 OSD 600mW 40CH FPV Racer PNP

ImmersionRC Vortex 150 Mini 150mm F3 OSD 600mW 40CH FPV Racer PNP

ImmersionRC Vortex 150 Mini 150mm F3 OSD 600mW 40CH FPV Racer PNP

ImmersionRC Vortex 150 Mini 150mm F3 OSD 600mW 40CH FPV Racer PNP

ImmersionRC Vortex 150 Mini 150mm F3 OSD 600mW 40CH FPV Racer PNP

ImmersionRC Vortex 150 Mini 150mm F3 OSD 600mW 40CH FPV Racer PNP

ImmersionRC Vortex 150 Mini 150mm F3 OSD 600mW 40CH FPV Racer PNP

ImmersionRC Vortex 150 Mini 150mm F3 OSD 600mW 40CH FPV Racer PNP

Specification:
Brand name: ImmersionRC
Item name: Vortex 150 FPV Racer
Wheelbase: 155mm
Arms: 2mm Flat CF/Plastic Hybrid
Frame: 2mm CF, with Aluminium Standoffs
Motors: Custom 1306-3100kV, 2mm Shaft
ESC: 16/20A EzESC Gen3
ESCs: Full Custom, 16A cont. 20A peak, rotorSENSE, OneShot125, OneShot42, Multishot
Flight Controller: STM32F303 based ('F3')
Gyro: SPI Gyro, for 8kHz loop speeds
OSD: Full Graphic
Video Tx Power: 600mw 40CH
Receiver Compatibility: CPPM, S-Bus, Spektrum™, XBus, SumH, SumD (no external adapters required) (Auto-Sense!)

FPV Camera: FatShark 600TVL CCD (HS1177 sensor + chipset)
Flight Time: Highly dependent upon battery, and flying style, 3-4 mins typical
Power Requirements: 3s-4s LiPo, 4s 750mAh >45C recommended
Weight: <249.99g w/500mAh pack
Note: Compatible receiver and display device required for initial setup and use, not included.

Feature:
Twin ‘F3’ Processors (Flight Control, and OSD)
3rd Gen 16A EzESCs, With OneShot125/42, and MultiShot support
Fusion of 3k weave Carbon Fibre and molded, tough plastic
Direct connection to PPM, Spektrum, S-Bus, XBus receivers
4s 500mAh – 750mAh battery recommended

Package Included:
1 X Vortex 150 Frame
4 X ESC
4 X Motor
4 X 3″ Tri-Blades
1 X 5.8G 40CH TX Module
1 X FPV Camera

You Might Also Like: