Flytower F1 Naze32 Flight Control AIO OSD BEC 40CH 25/200/400mW Switchable VTX with BL20A 4 in 1 ESC


Flytower F1 Naze32 Flight Control AIO OSD BEC 40CH 25/200/400mW Switchable VTX with BL20A 4 in 1 ESC
Price: US$51.2
Free Shipping





Flytower F1 Naze32 Flight Control AIO OSD BEC 5.8G 40CH 25/200/400mW Switchable Transmitter Combo With BL20A 4 in 1 ESC

Flytower F1 Naze32 Flight Control AIO OSD BEC 40CH 25/200/400mW Switchable VTX with BL20A 4 in 1 ESC

Flytower F1 Naze32 Flight Control AIO OSD BEC 40CH 25/200/400mW Switchable VTX with BL20A 4 in 1 ESC

Flytower F1 Naze32 Flight Control AIO OSD BEC 40CH 25/200/400mW Switchable VTX with BL20A 4 in 1 ESC

Specification:
Item Name: Naze32 FC AIO OSD BEC Transmitter combo with 20A 4 In 1 ESC
Model: Flytower F1
Flight Control Board: Naze32 FC
BEC Output: 5V 3A
FPV Transmitter: 5.8G 40CH 25mW 200mW 400mW Switchable Transmitter
ESC: 20A Blheli 4 in 1 ESC support oneshot
– Stackable – Mount our 4 in 1 ESC
Compact – Only 36x36x13mm.
Weight – 23.3 grams and 2 layout boards
– Professional – Symmetrical, Neat and Tidy and Easy to install in any racing drone
– 36x36mm board with 30.5mm mounting holes
STM32F103CB CPU, 72Mhz inc FPU
– High-Capacity Flash
– use MPU6500 as accelerometer & gyro
– MicroUSB socket
-1x 4pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
– The on-board pins are easily connected to our next 4 in 1 ESC &PDB board
-Internal VTX (40CH) (25/200 / 400MW adjustable power video transmission)
– 1x 4pin JST-SH sockets with BUZZER & WS2811 RGB LED
– 1x 4pin JST-SH socket for SWD debugging
– 1x 4pin JST-SH socket for Video & Audio transmission
– 1 IPX sockets eeay connet the external antenna
– 4x 3 Pad for motor output
– 1×2 Pad for batter in easy solder

Features:
1. Flight Performance
The Flytower F1 builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails.

2. Configurable
The Flytower F1 runs Cleanflight and Bataflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).

3. Tiny and lightweight
The Flytower F1 has a standard L*W*H=36x36X13mm form-factor with 30.5mm mounting holes and weighs just 23.3 grams.

4. Flight Logging
On-board high-capacity black box flight log recorder – optimize your tuning and see the results of your setup without guesswork.

5. OneShot ESC
Full support for OneShot ESCs for easy PID tuning and a sharper response.

6. Broad RC receiver Support
Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM,receivers. No external inverters required (built-in).

7. Programmable LEDs
Dedicated output for multi-colored LED strips – great for FPV racing, line-of-sight flying orientation and night flying.

8. Battery Monitoring
Battery monitoring ports for voltage and current.

9. Buzzer
Buzzer port for audible warnings and notifications

Package Included:
1x Naze32 Flight Control Board AIO OSD BEC Transmitter
1x 20A 4 in 1 ESC
4x M3*15 Scews
4x M3*5.2MM Aluminum Standoff
4x M3*2.5MM Aluminum Standoff
4x M3 self-locking Nut
1x RC IN (PPM/SUBS) cable
1x RC IN (DSM2) Cable
1x Camera Transmitter cable
1x IPX-SMA Male Antenna Adaptor

You Might Also Like: