|QX95 Racing Quadcopter||
Weight: 40g (without battery)
Flight weight: 56g (Include battery)
Flight controller: SP RACING F3_EVO_Brush
Firmware version: Cleanflight 1.13.0
Receiver: Flysky compatible receiver
Motor: 8520 Brush Motor
Prop Size: 55mm
Camera: 520TVL HD CMOS 1/4 inch Camera
Video Output format: PAL / NTSC
AV Wireless Transmitter: 5.8g 25mw 32ch
Batterry: 3.7V 600mah Lipo battery
Flight time: 6 minutes
With LED_Strip function
Flight control base on F3 EVO, high current MOS output, convenient according to the personal touch.
Made of high quality carbon fiber material, a full set of take-off weight of 56 grams with battery.
With 4 LED light, have LED_Strip function.
QX95 shooting better, in the flight will not be blocked by the wind blade.
The user only need to be equipped with a remote control and a receiver to experience the indoor FPV flight.
|Eachine i6 Transmitter||
Channels: 6 Channels
Model Type: Glider/Heli/Airplane
RF Range: 2.40-2.48GHz
RF Power: Less Than 20dBm
2.4ghz System: AFHDS 2A and AFHDS
Code Type: GFSK
Low Voltage Warning: less than 4.2V
DSC Port: PS2;Output:PPM
Charger Port: No
ANT length: 26mm*2(dual antenna)
Power: 6V 1.5AA*4
Display mode: Transflective STN positive type,
128*64 dot matrix VA73*39mm,white backlight.
Model Memories: 20
Aileron-CH1, Elevator-CH2, Throttle-CH3,
Ch 5 & 6 for reserve
Works in the frequency range of 2.405 to 2.475GHz.
Uses a high gain and high quality multi directional antenna
Each transmitter has a unique ID
Low power electronic components and sensitive receiver chip.
AFHDS2A system has the automatic identification function
AFHDS2A has built-in multiple channel coding and error-correction
1 x QX95 Carbon Fibre Frame kit
4 x 8520 Coreless Motor
1 x F3_EVO_Brush Flight controller
1 x Receiver
1 x 5.8G VTX w/Camera antenna
8 x 55mm Propeller
2 x 3.7V 600mah Battery
1 x Charging cable (use with balanced charge)
1 x Paddle propeller
1 x Eachine i6 Transmitter