Size:93.5 X 60 X 17 mm
Discharger power: 5W
Support battery type:
1.Li-Polymer/Li-Fe 2 ~ 6 Cell(Nominal voltage of 7.4V ~ 22.2V partial pressure connector)
2.Receiver Battery: 1.2V ~ 8.5V DC (Not limited battery type, but requires external 7.4V ~ 11.1V, use JST connector)
3.The balance voltage setting range (lower limit): 2.0V ~~ 3.9V (default 3.3V)
4.Discharge voltage setting range (lower limit): 3.0V to 4.2V (default 3.9V)
5.Discharge current (4.0V/Cell): about 450mAh
6.Support the battery port: conventional batteries linear port the Jst plug port Rx port
Used for the imbalance of Lithium battery.
Can monitor the battery voltage and discharge protection function, balance voltage.
It’s the best assistant of battery for RC car and RC boat.
Designed for polymer lithium batteries and lithium iron phosphate battery, accurate measurement of the overall battery voltage and cell voltage, perform a balancing operation of multiple series-connected batteries, battery discharger, in order to avoid battery damage and long term storage.
Its battery balance function can allow battery charging/using before or after to perform balance function.
It also allows use with charger to perform partial pressure balance in the charging process.
Its large LCD screen can display up to 6 string lithium battery voltage.
1 x 3 in 1 LCD Display