Item name: 5.8G 48CH 25mW FPV Transmitter
Power supply: DC 7-24V / 5V
Antenna: Exclusive Dipole Whip
Supply current(12V): 75MA
Weight: 2.2g (Including antenna weight 0.7g)
Package size: 60*90*20mm
Package weight: 5g
Using high-quality components,professional circuit design
Channel changes through S.BUS
1. The first step: Press the button (1~2 seconds) to enter the setting mode, the module enters the channel number (1 ~ 8) setting. Short press the button to adjust "1 ~8" (LED2 flashes once, LED0 flashes the number represents the current set channel number.);
2. Step 2: Press and hold the key (1~2 seconds) to enter the channel group (A~F) setting, short press the button to adjust "A~F" (LED2 flashes twice, LED0 flashes the current setting Channel group.);
3. The third step: long press the button (1~2 seconds) to exit the setting mode, LED0 and LED2 remain lit.
4.To observe the current channel settings, just re-power to view.
Corresponding reference item:
LED2: represents the channel type (channel number or channel group). Flashes once, representing the LED0 is the channel number (1~8), blinking twice on behalf of LED0 shows the channel group (A~F).
LED0: LED0 flashes the number represents the channel number (1~8), or channel group (A~F). LED3: SBUS signal ON LED3 will be lit.
1 x 5.8G 48CH 25mW FPV Transmitter