Adopt a voltage doubler detector, more sensible.
Maximum input: 20dBm(burning power)
Detection output: The default is positive
Working Frequency: 0.1-3200MHz
RC Filter: R = 10K, C = 1nF(two elements in parallel output ports)
Size: Approx. 24 x 15mm / 0.94 x 0.59inch
Note: If you want to lower operating frequency, you can increase the capacitor of the output, if you want fast response, then need to reduce capacity, it is a contradiction that can be configured according to your needs.
The working principle:
This product uses a voltage doubler detector (consisting of two reverse microwave diodes), 1 time sensitive than single-tube detector(about 6dB),
high sensitivity (typical -30dBm, or even to -40dBm).
1 x RF Envelope Detector